Equipment in a tough environment? It must be tested
Hostile
environments that trigger testing
SafeWork NSW says testing applies where equipment is exposed to conditions like moisture, heat, vibration, mechanical damage, corrosive chemicals or dust.
AS/NZS 3760 · RCD testing · Records
Test and Tag Sydney
Portable appliance test and tag and RCD testing for offices, shops, kitchens, workshops, schools and sites all across Sydney, from Wetherill Park and Kemps Creek to Penrith and the Blue Mountains. Tested to AS/NZS 3760, tagged on the spot and recorded, so you can show you’ve met your workplace safety duties.
★★★★★ 100+ five-star Google reviewsFree site assessmentAS/NZS 3760All across SydneyAfter-hours testing
Electrical emergency? Call us 24/7
Day or night, weekends and public holidays.
If anyone is hurt, call 000.
Dann’s Electrical tests and tags portable appliances and tests RCDs for offices, shops, kitchens, workshops, schools and sites across Penrith and greater Sydney. Testing is done to AS/NZS 3760, items are tagged on the spot, and you get a register to show an inspector, insurer or landlord. Items that fail are taken out of service, and can be repaired or replaced while the team is on site.
Test & tag
Testing that stands up to an audit
In NSW, plug-in equipment used where it can be damaged by moisture, heat, vibration, dust or knocks, must be regularly inspected and tested by a competent person, with records kept. Kitchens, workshops, warehouses and construction sites almost always qualify.
We test and tag to AS/NZS 3760, test your safety switches, and give you a register you can hand to an inspector, insurer or landlord. Items that fail are taken out of service, and we can repair or replace them on the spot.
AS/NZS
3760 testing
RCD
Testing available
Register
For your records
After hours
Testing available
NSW electrical contractor licence 399632C
Trusted by Sydney businesses
What we test
Test and tag services
Portable appliance testing
Leads, power boards, tools and appliances tested to AS/NZS 3760.
Tagging and labelling
Each item tagged with the test date, next test date and tester.
RCD testing
Safety switches tested for trip time, not just the button.
Office equipment
Computers, printers, kitchen appliances and chargers.
Workshop and site tools
Power tools, leads and equipment in hostile environments.
Kitchen and hospitality
Fryers, mixers, bar fridges and coffee machines.
Registers and reports
An itemised register for audits, insurers and landlords.
Repairs on the spot
Failed leads and plugs replaced or repaired where possible.
How it works
What happens when you call
1
Tell us about the workplace
Call 0478 014 622 or send the form with roughly how many items and what kind of site it is.
2
Fixed price and a time
We give you a fixed price and book a time, including after hours so work isn’t interrupted.
3
Tested, tagged, recorded
Every item tested and tagged, RCDs tested, and your register sent through.
Why us
Book a site assessmentWhy workplaces use us for test and tag
01
Licensed electricians
Testing by licensed electricians, who can repair what fails on the spot.
02
Audit-ready records
A clear register with every item, result and next test date.
03
After-hours work
Evenings, nights and weekends, so the work happens around your trading hours.
04
SWMS on every job
Safe work method statements prepared for our work, ready for your site induction.
05
Fixed-price quotes
Every job quoted at a fixed price after a free site assessment. No hidden fees.
06
All across Sydney
We travel all across Sydney, with sites in Wetherill Park, Kemps Creek and the western industrial precincts.
Accreditations
Accredited, prequalified and insured
The checks your procurement, facilities or safety team will ask for.
CM3 certified
Prequalified on Cm3, so your procurement or facilities team can check our safety and compliance before engaging us.
Level 2 ASP 7538
All four Level 2 classes (2A-2D) in-house, for service lines, poles and metering.
Endeavour Energy authorised
Authorised for service line work on Endeavour Energy’s network.
Plus ES authorised
Authorised by Plus ES for contestable metering work.
NECA member
Member of the National Electrical and Communications Association.
$20m public liability
Cover on every job, with details available for your records.
SWMS on every job
Safe work method statements prepared for our work, ready for your site induction.
NSW contractor licence
Licence 399632C, held by Dann’s Electrical Pty Ltd as a licensed electrical contractor.
10+ yearsIn the industry
Meet the owner
Dan Neale, Director
Dan is a licensed electrician and the director of Dann’s Electrical. He runs the business from its office in Emu Plains, with a team of electricians and apprentices working across Sydney.
NSW licence 399632C
Level 2 ASP 7538
CM3 certified
$20m public liability
SWMS on every job
NECA member
Your test and tag duties
What SafeWork NSW says workplaces must do
Testing and record rules from SafeWork NSW.
A tag can be your record
4 details
every test record must show
SafeWork NSW says a test record must show who tested it, the date, the outcome and the next test date, and the record can be a tag on the equipment.
Keep the records until the next test
Records
kept until next tested or disposed of
SafeWork NSW says a record of testing must be kept until the equipment is next tested, or permanently removed from the workplace or disposed of.
Failed the test? It can’t stay in use
Isolate
unsafe equipment must be disconnected
SafeWork NSW says businesses must ensure any unsafe electrical equipment under their control is disconnected or isolated from its supply.
How often? It depends on the workplace
AS/NZS 3760
sets inspection and testing frequency
SafeWork NSW says testing frequency varies with the nature of the workplace. AS/NZS 3760 sets it out, and construction sites use AS/NZS 3012.
Who can test and tag? A competent person
Competent
trained, qualified or experienced
SafeWork NSW says plug-in equipment in these workplaces must be regularly inspected and tested by a competent person, someone with the knowledge and skills from training, qualification or experience.
Where we work
Test and tag across Sydney
We travel all across Sydney for commercial and industrial work. We look after sites in Wetherill Park, Kemps Creek and the western industrial precincts, as well as Penrith, the Blue Mountains and the Hawkesbury.
Penrith area
Blue Mountains
Hawkesbury
Western Sydney growth area
How often does equipment need to be tested and tagged?
SafeWork NSW’s Code of Practice says plug-in equipment in higher-risk environments should be tested at least every 12 months, and more often in some, such as every six months for manufacturing and workshops. On construction and demolition sites, SafeWork NSW says at least every three months. AS/NZS 3760 sets the detailed intervals, and we’ll recommend a schedule for your site.
Does my workplace need test and tag?
If plug-in equipment is used where it can be damaged by moisture, heat, vibration, dust, chemicals or knocks, SafeWork NSW says it must be regularly inspected and tested by a competent person. Most kitchens, workshops, warehouses and sites fall into that.
Do you test safety switches too?
Yes. We test RCDs as part of the visit and record the results.
What happens to items that fail?
They’re tagged as failed and taken out of service. Where we can, we repair or replace leads and plugs on the spot.
Do you provide reports?
Yes, an itemised register with every item, result and next test date, ready for audits, insurers and landlords.
Can you test after hours?
Yes. We test outside business hours so staff aren’t without their equipment.
How much will it cost?
Site assessments are free, and our work is fixed price. We give you a fixed price before any work starts, so the price you agree to is the price you pay. There are no hidden fees.
Which areas do you cover?
All across Sydney. We look after sites in Wetherill Park, Kemps Creek and the western industrial precincts, plus Penrith, the Blue Mountains and the Hawkesbury.
Free site assessment
Need test and tag?
Need a commercial electrician urgently? Call any time, 24/7. For fit-outs, maintenance and upgrades, send us the site and job details and we’ll book in a free site assessment.
0478 014 622- dann@dannselectrical.com.au
- @danns_electrical
- NSW contractor licence 399632C
- 24/7 for emergencies
- Based in Emu Plains · travelling all across Sydney